Almas Steel & Alloys Private Limited
Pune, Maharashtra
GST No. 27AAHCA6323N1ZE
TrustSEAL Verified
Call 0804860309568% Response Rate
SEND EMAIL
These steels are aimed at the manufacturing of tools used in cold processing of other steels, cast irons and non ferrous metals and in diversified operations such as cutting, bending, forming, coining, extrusion, steel wire drawings, wooden work, ceramic pressing, pigment grinding, rock drilling, paper cutting and various other applications.
Properties & Characteristics
Product Details:
| Minimum Order Quantity | 100 Kg |
| Grade | D2-1.2379 |
| Usage/Application | Automobile Industry |
| Brand | Almas |
| Length | 2-6 Feet |
| Material | Steel |
Specifications:
| Norms | Grade | C | Si | Mn | P,S | Cr | Mo | V |
| GB | Cr12Mo1V1 | 1.40-1.60 | ≤0.60 | ≤0.60 | ≤0.03 | 11.00-13.00 | 0.60-0.80 | 0.90-1.10 |
| ASTM | D2 | 1.40-1.60 | 0.10-0.60 | 0.20-0.60 | ≤0.03 | 11.00-13.00 | 0.60-0.80 | 0.90-1.10 |
| DIN | 1.2379 | 1.50-1.60 | 0.10-0.40 | 0.15-0.45 | ≤0.03 | 11.00-12.00 | 0.60-0.80 | 0.90-1.00 |
| JIS | SKD10 | 1.45-1.60 | 0.10-0.60 | 0.20-0.60 | ≤0.03 | 11.00-13.00 | 0.60-0.80 | 0.90-1.00 |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Shape | Rectangle |
| Material Grade | D3 |
| Technique | Forged |
| Application | Automobile Industry |
| Finishing | Black |
| Surface Treatment | Annealed |
| Alloy | With Alloy |
| Brand | Almas |
| Country of Origin | Made in India |
| Length | 5000 mm |
Additional Information:
Product Details:
| Application | Automobile Industry |
| Surface Condition | Black Surface |
| Hardness (HRC) | 25 HRC |
| Product Type | Steel Bars |
| Country of Origin | Made in India |
| Width | 100 mm |
| Length | 2000 mm |
| C 1.54 | Si 0.32 | Mn 0.34 | Cr 12.00 | Mo 0.76 | V 0.91 |
Steel Properties
HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.
Physical Properties
| Coefficient of thermal expansionat °C | 20-100 | 20-200 | 20-300 | 20-400 |
| 10-6 m/(m*K) | 10.6 | 11.5 | 11.8 | 12.3 |
| Thermal Conductivity at °C | 20 | 350 | 700 |
| W/(m*K) | 16.7 | 20.5 | 24.2 |
Application
HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.
Heat Treatment
| Soft annealing °C | Cooling | Hardness HB |
|---|---|---|
| 840 - 870 | Furnace | max. 250 |
| Stress-relief annealing °C | Cooling |
|---|---|
| approx. 660-710 | Furnace |
| Hardening °C | Quenching | Hardness after quenching HRC |
|---|---|---|
| 1000-1050 | Air, oil or saltbath, 500-550 °C | 63 |
| Tempering °C after quenching | 100 | 200 | 300 | 400 | 500 | 525 | 550 | 600 |
| HRC | 64 | 61.5 | 58.5 | 58.5 | 59 | 60 | 57 | 50 |
Additional Information:
Product Details:
| Shape | Flat Bars |
| Surface Finish | Polished |
| Single Piece Length | 3 meter |
| Brand | Almas |
| Material | Steel |
| Country of Origin | Made in India |
| Thickness | 50 mm |
Die & Tool Steel
We are leading importer exporter and supplier from Pune, our product range includes Die & Tool Steel such as Cold Work Steel, O1 Tool Steel, D2 Die Steel and D3 Tool Steel.
Product Description:
Being a renowned and the highly trusted enterprises in this industry, we are offering an optimum quality assortment.Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Shape | Square |
| Application | Automobile Industry |
| Single Piece Length | 3 meter |
| Alloy | With Alloy |
| Material Grade | D2 |
| Finishing | Black |
| Brand | Almas |
| Surface Treatment | Annealed |
| Width | 1200 mm |
| Thickness | 620 mm |
| C 1.54 | Si 0.32 | Mn 0.34 | Cr 12.00 | Mo 0.76 | V 0.91 |
D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.
Steel Properties
HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.
Physical Properties
| Coefficient of thermal expansionat °C | 20-100 | 20-200 | 20-300 | 20-400 |
| 10-6 m/(m*K) | 10.6 | 11.5 | 11.8 | 12.3 |
| Thermal Conductivity at °C | 20 | 350 | 700 |
| W/(m*K) | 16.7 | 20.5 | 24.2 |
Application
HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.
Heat Treatment
| Soft annealing °C | Cooling | Hardness HB |
|---|---|---|
| 840 - 870 | Furnace | max. 250 |
| Stress-relief annealing °C | Cooling |
|---|---|
| approx. 660-710 | Furnace |
| Hardening °C | Quenching | Hardness after quenching HRC |
|---|---|---|
| 1000-1050 | Air, oil or saltbath, 500-550 °C | 63 |
| Tempering °C after quenching | 100 | 200 | 300 | 400 | 500 | 525 | 550 | 600 |
| HRC | 64 | 61.5 | 58.5 | 58.5 | 59 | 60 | 57 | 50 |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Shape | Flats |
| Usage/Application | Automobile Industry |
| Application | Automobile Industry |
| Material Grade | D2KNL |
| Alloy | With Alloy |
| Single Piece Length | 3 meter |
| Brand | Almas |
| Finishing | BLACK |
| Grade | D2 Knl |
| Material | D2KNL |
| Surface | Black |
| I Deal In | New Only |
| Width | 1/2 feet - 2 feet |
| Thickness | 20~250 mm |
Additional Information:
Product Details:
| Thickness/Diameter | 3 Inch |
| Material Grade | SKD11 |
| Single Piece Length | 3 meter |
| Surface Finish | Black |
| Brand | Almas |
| Usage | Manufacturing |
| Application | Automobile Industry |
| Alloy | With Alloy |
| Diameter | 600 mm |
| Country of Origin | Made in India |
| Shape | Rectangular |
| C 1.54 | Si 0.32 | Mn 0.34 | Cr 12.00 | Mo 0.76 | V 0.91 |
D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.
Steel Properties
HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.
Physical Properties
| Coefficient of thermal expansionat °C | 20-100 | 20-200 | 20-300 | 20-400 |
| 10-6 m/(m*K) | 10.6 | 11.5 | 11.8 | 12.3 |
| Thermal Conductivity at °C | 20 | 350 | 700 |
| W/(m*K) | 16.7 | 20.5 | 24.2 |
Application
HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.
Heat Treatment
| Soft annealing °C | Cooling | Hardness HB |
|---|---|---|
| 840 - 870 | Furnace | max. 250 |
| Stress-relief annealing °C | Cooling |
|---|---|
| approx. 660-710 | Furnace |
| Hardening °C | Quenching | Hardness after quenching HRC |
|---|---|---|
| 1000-1050 | Air, oil or saltbath, 500-550 °C | 63 |
| Tempering °C after quenching | 100 | 200 | 300 | 400 | 500 | 525 | 550 | 600 |
| HRC | 64 | 61.5 | 58.5 | 58.5 | 59 | 60 | 57 | 50 |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kg |
| Surface Treatment | Annealed |
| Brand | Almas |
| Shape | Flat Bars |
| Grade | D3 |
| Finishing | Black |
| Hardness | Less than 241HB |
| Alloy | With Alloy |
| Material | Steel |
| Application | Automobile Industry |
| C 2.00 | Si 0.30 | Mn 0.30 | Cr 12.00 |
D3 Steel Having 12 % ledeburitic chromium tool steel with great wears resistance .
Basically utilized as cutting tools for sheets up to 4 mm thickness, trimming dies, blanking dies for paper and plastics, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.
D3 Steel having properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools.
Physical Properties
| Coefficient of thermal expansionat °C | 20-100 | 20-200 | 20-300 | 20-400 | 20-500 | 20-600 | 20-700 |
| 10-6 m/(m*K) | 10.7 | 11.6 | 12.3 | 12.6 | 12.9 | 13.2 | 13.3 |
| Thermal Conductivity at °C | 20 | 350 | 700 |
| W/(m*K) | 16.6 | 20.5 | 24.3 |
Application
HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.
Heat Treatment
| Soft annealing °C | Cooling | Hardness HB |
|---|---|---|
| 810 - 850 | Furnace | max. 250 |
| Stress-relief annealing °C | Cooling |
|---|---|
| approx. 670-720 | Furnace |
| Hardening °C | Quenching | Hardness after quenching HRC |
|---|---|---|
| 940 – 970 | Oil | 64.5 |
| 950-980 | Air (up to 30 mm thickness) | 64.5 |
| Tempering °C after Quenching | 100 | 200 | 300 | 400 | 500 | 600 |
| HRC | 63.5 | 61.5 | 58 | 57.5 | 55 | 47 |
Additional Information: