Almas Steel & Alloys Private Limited
Almas Steel & Alloys Private Limited
Bhosari, Pune, Maharashtra
Send E-mail
Send SMS
Home  » Our Products  » 

Flat Bars


Wholesale Trader of a wide range of products which include 1.2379 tool steel, aisi d3 forged tool steel flat bars, d2 imported flats, d3 cr12 steel forged flat bar, din 1.2379 forged die steel flats bars and skd 11tool steel forged flat bars.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 300 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
Product TypeSteel Bars
Material GradeD2 1.2379
Surface ConditionBlack Surface
Hardness (HRC)25
ApplicationAutomobile Industry
Grade1.2379 Tool Steel, Forged Flats 1.2379 Tool Steel
Width100-600mm
Length2000-6000mm

HCHCR-D2 DIN 2379 AISI D2 AFNOR Z160CDV12
C 1.54Si 0.32Mn 0.34Cr 12.00Mo 0.76V 0.91
D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness''s up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

 

Steel Properties

HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.

 

Physical Properties
Coefficient of thermal expansionat °C20-10020-20020-30020-400
10-6 m/(m*K) 10.611.511.812.3

 

Thermal Conductivity at °C20350700
W/(m*K)16.720.524.2

 

Application

HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.

 

Heat Treatment
Soft annealing °CCoolingHardness HB
840 - 870Furnacemax. 250

 

Stress-relief annealing °CCooling
approx. 660-710Furnace

 

Hardening °CQuenchingHardness after quenching HRC
1000-1050Air, oil or saltbath, 500-550 °C63

 

Tempering °C after quenching100200300400500525550600
HRC6461.558.558.559605750




Additional Information:
  • Item Code: D2IMPORTEDFLAT
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: PUNE
  • Delivery Time: 1-3 DAYS
  • Packaging Details: BUBBLE PACKING OR AS PER CUSTOMERS REQUIREMENTS.

Yes! I am Interested


Get Best Quote

Approx. Rs 170 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
Surface TreatmentANNEALED
BrandAlmas
ShapeRound Flat Square
GradeHchcr-D3
FinishingBLACK
Product TypeSTEEL BARS
Diameter10-600MM
HardnessLess than 241HB
Payment Terms30% ADVANCE BALANCE BEFORE DELIVERY
Test CertificateMETALLURGICAL TEST
AlloyWith Alloy
MaterialD3
ApplicationAutomobile Industry
Lenght2-6 feet
Square Bar25-300mm

HCHCR-D3 DIN 2080 AISI D3 AFNOR Z210CW12-01
C 2.00Si 0.30Mn 0.30Cr 12.00

D3 Steel Having 12 % ledeburitic chromium tool steel with great wears resistance .
Basically utilized as cutting tools for sheets up to 4 mm thickness, trimming dies, blanking dies for paper and plastics, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.

Steel Properties

D3 Steel having properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools.

 

Physical Properties
Coefficient of thermal expansionat °C20-10020-20020-30020-40020-50020-60020-700
10-6 m/(m*K) 10.711.612.312.612.913.213.3

 

Thermal Conductivity at °C20350700
W/(m*K)16.620.524.3

 

Application

HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.

 

Heat Treatment
Soft annealing °CCoolingHardness HB
810 - 850Furnacemax. 250

 

Stress-relief annealing °CCooling
approx. 670-720Furnace

 

Hardening °CQuenchingHardness after quenching HRC
940 – 970Oil64.5
950-980Air (up to 30 mm thickness)64.5

 

Tempering °C after Quenching100200300400500600
HRC63.561.55857.55547


Additional Information:
  • Port of Dispatch: PUNE
  • Production Capacity: 10000kgs
  • Delivery Time: 1-3 DAYS
  • Packaging Details: BUBBLE PACKING OR AS PER CUSTOMERS REQUIREMENTS.

Yes! I am Interested
View PDF


REQUEST CALLBACK
Get Best Quote

Approx. Rs 300 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
Material GradeD2 1.2379
Single Piece Length3 meter
BrandALMAS
FinishingBLACK
Surface TreatmentANNEALED
Test CertificateMETALLURGICAL TEST
Payment Terms30% ADVANCE BALANCE BEFORE DELIVERY
Surface ConditionBLACK
Material1.2379
ApplicationAutomobile Industry, Die Making
Product TypeSTEEL BARS
Diameter10-600mm
SizeTHICKNESS 10-200mm
AlloyWith Alloy
GradeD2
Width50~1200mm
Thickness10~620mm

HCHCR-D2 DIN 2379 AISI D2 AFNOR Z160CDV12
C 1.54Si 0.32Mn 0.34Cr 12.00Mo 0.76V 0.91

 

D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness's up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

 

Steel Properties

HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.

 

Physical Properties
Coefficient of thermal expansionat °C20-10020-20020-30020-400
10-6 m/(m*K) 10.611.511.812.3

 

Thermal Conductivity at °C20350700
W/(m*K)16.720.524.2

 

Application

HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.

 

Heat Treatment
Soft annealing °C Cooling Hardness HB
840 - 870Furnacemax. 250

 

Stress-relief annealing °C Cooling
approx. 660-710Furnace

 

Hardening °C Quenching Hardness after quenching HRC
1000-1050Air, oil or saltbath, 500-550 °C63

 

Tempering °C after quenching100200300400500525550600
HRC6461.558.558.559605750


Additional Information:
  • Item Code: D2IMPORTEDFLATS
  • Port of Dispatch: PUNE
  • Delivery Time: 1-3 DAYS
  • Packaging Details: BUBBLE PACKING OR AS PER CUSTOMER REQUIREMENT AT EXTRA COST.

Yes! I am Interested
View PDF


  • +1
Get Best Quote

Approx. Rs 170 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
ShapeFlat
Diameter10-600mm
ConditionNew
ApplicationAutomobile Industry
UsageManufacturing
SurfaceBlack
MaterialD3
TechniqueForged
Thickness10-100 mm
Width6 -24 Inch
GradeHchcr-D3

HCHCR-D3 DIN 2080 AISI D3 AFNOR Z210CW12-01
C 2.00Si 0.30Mn 0.30Cr 12.00

D3 Steel Having 12 % ledeburitic chromium tool steel with great wears resistance .
Basically utilized as cutting tools for sheets up to 4 mm thickness, trimming dies, blanking dies for paper and plastics, shear cutting edges and rotational shear edges for sheet thicknesses up to 2 mm.

Steel Properties

D3 Steel having properties of High Carbon 2% and High chromium 12 % tool steel with high wear resistance. Its supply condition is normally annealed to easy machining which recommended hardness is 57-58 HRC after making the dies & tools.

 

Physical Properties
Coefficient of thermal expansionat °C20-10020-20020-30020-40020-50020-60020-700
10-6 m/(m*K) 10.711.612.312.612.913.213.3

 

Thermal Conductivity at °C20350700
W/(m*K)16.620.524.3

 

Application

HCHCR D3 is used in cold Dies & tooling application that required the achievement of high degree of accuracy in hardening & tempering, such as dies drawing, forming cold rolls, powder metal tooling and blanking and trimming dies, blanking dies for paper and plastics, shear blades , cold die punches , Ejector pins etc.

 

Heat Treatment
Soft annealing °C Cooling Hardness HB
810 - 850Furnacemax. 250

 

Stress-relief annealing °C Cooling
approx. 670-720Furnace

 

Hardening °C Quenching Hardness after quenching HRC
940 – 970Oil64.5
950-980Air (up to 30 mm thickness)64.5

 

Tempering °C after Quenching100200300400500600
HRC63.561.55857.55547


Additional Information:
  • Item Code: HCHCRFLATS
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Thirty Percent Advance Balance Before Delivery
  • Port of Dispatch: PUNE
  • Production Capacity: AS PER REQUIREMENT
  • Delivery Time: 1-3 DAYS
  • Packaging Details: BUBBLE PACKING OR AS PER CUSTOMERS REQUIREMENTS.

Yes! I am Interested
View PDF


Get Best Quote

Approx. Rs 300 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
UsageManufacturing
Surface TreatmentANNEALED
GradeD2
FinishingBLACK
Product TypeSTEEL BARS
SurfaceBLACK
Payment Terms30% ADVANCE BALANCE BEFORE DELIVERY
Test CertificateMETALLURGICAL TEST
Diameter10-600MM
AlloyWith Alloy
MaterialD2
ApplicationAutomobile Industry
ConditionNew
Length2000-5800mm
Width40mm-1500mm

HCHCR-D2 DIN 2379 AISI D2 AFNOR Z160CDV12
C 1.54Si 0.32Mn 0.34Cr 12.00Mo 0.76V 0.91

 

D2 Steel Consolidates maximum wear resistance, great durability, exceptional front line maintenance and treating resistance. 12 % ledeburitic chromium steel. It can be nitride after special heat treatment. It can be utilized as threading rolls and dies, icy trimming, cutting and stamping tools for sheet thickness''s up to 6 mm, accuracy cutting instruments for sheet thicknesses up to 12 mm.

 

Steel Properties

HCHCR-D2 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition. D2 is the superior steels than D3 due to high alloys properties.

 

Physical Properties
Coefficient of thermal expansionat °C20-10020-20020-30020-400
10-6 m/(m*K) 10.611.511.812.3

 

Thermal Conductivity at °C20350700
W/(m*K)16.720.524.2

 

Application

HCHCR D2 tool steel applicable for cold stamping or forming dies, cold forming rolls, Chipper knives, Punches, slitters, shear blades, tools, tyre shredders, trimming, cutting Threading Dies , stamping tools Etc.

 

Heat Treatment
Soft annealing °CCoolingHardness HB
840 - 870Furnacemax. 250

 

Stress-relief annealing °CCooling
approx. 660-710Furnace

 

Hardening °CQuenchingHardness after quenching HRC
1000-1050Air, oil or saltbath, 500-550 °C63

 

Tempering °C after quenching100200300400500525550600
HRC6461.558.558.559605750


Additional Information:
  • Item Code: DIIFLATS
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: PUNE
  • Production Capacity: 10000kgs
  • Delivery Time: 1-2Days
  • Packaging Details: BUBBLE PACKING IF NEEDED

Yes! I am Interested
View PDF


Get Best Quote

Approx. Rs 300 / Kilogram Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
MaterialSteel
GradeQ195/Q235/A36/SS400/S235JR
BrandAlmas
Single Piece Length3 meter
Length2-9 mtr
Thickness9-50 mm

We are offering SKD 11Tool Steel Forged Flat Bars to our clients.

Additional Information:
  • Item Code: SKD11FLATS
  • Pay Mode Terms: T/T (Bank Transfer),D/P,D/A,Thirty Percent Advance Balance Before Delivery
  • Port of Dispatch: PUNE
  • Production Capacity: 10000kgs
  • Delivery Time: 1-3 DAYS
  • Packaging Details: BUBBLE PACKING OR AS PER CUSTOMERS REQUIREMENTS.

Yes! I am Interested
View PDF


 

Explore More Products
 

 

Send SMS
Almas Steel & Alloys Private Limited
Shabbir Bhabha  (Director)
J-452, Near Quality Circle, MIDC
Bhosari, Pune - 411026 , Maharashtra , India
Send E-mail
Share Us:
X